Special discount has ended
Please note each user for only 1 item(s)
if the goods arrival in 90 days,we will inform you by email!
Error appeared,Please try again later!
Q & A
It absolutely works on the 430ex II. I have that flash with the 7D and this is a lot quicker than going through the menu. If your on the fence on buying this, I would strongly suggest it.
By Steven R. Heldenbrand on January 20, 2018
My YN-622 doesnt work well on my 6D. I dont think they are completely compatible. Very depressing . However using two or more receivers works well but stuck manually controlling lights.
By gerianna on December 8, 2017
Yes it will but Why? the 600EX RT has a Radio in it controlled by the YN E3-RT Radio Transmitter the only thing you need. The YN 622 will work it but your going to have to put the YN 622 rx on the flash and the YN 622 TX on camera when all you needed is the YN E3-RT Radio Transmitter
By LRM Photos on June 3, 2017
I'm not sure by itself, does it have a built-in receiver. I would check with the manufactures website. I know it well if you add the YN 620C receiver
By Koto Akane on May 15, 2018
Hello Yes should be compatible Thank you
By Hayden on May 14, 2018
they work great on both of my 5D ll but all three of my flash are HSS I do not know what your using as for Flashs and with that said you really do not need the TX you can set it all from the back of your 5d menu maybe you need to set it there first
By LRM Photos on May 13, 2018
Yes, you will need a receiver for it.
By Pieter Roelofse on May 13, 2018
Sounds like it should work. Make sure you have all channel and group settings correct. I use 6d and works great
By D. Kamminga on May 12, 2018
By Jerry H. on May 12, 2018
に基づいて 328 お客様の評価
By Carlos E. Read
December 28, 2017
This slave can work in two different modes: 1.- The FLASH dominates the settings, and 2.- The CAMERA dominates. The problem that I find is that IT SWITCHES FROM ONE MODE TO THE OTHER FOR NO APPARENT REASON. That functionality should be via one clearly marked button, and that is a big MINUS in my qualification of this flash trigger. Another (minor) issue is that when you take it off the camera's hot shoe, very frequently THE BATTERY COMPARTMENT COMES OFF and falls to the floor. Other than those issues, the unit works as supposed to. I have two pairs of these!
By Gadget Lover
December 27, 2017
Very nice and inexpensive transmitter. I use this to trigger Yongnuo YN622C II receivers and they have worked without fail. Much less expensive than a Canon option and I'm so glad that I stumbled across this product. For the price, probably even aside from the price, these Yongnuo products are great and I am amazed how off camera flash has changed my photography, without taking all of my money. Of course, I have had flashes not fire, but I don't think I could ever trace the reason to this transmitter or triggers. My only problem that I had with this is the mount design. What I mean is that it mounts horizontally on your camera hotshoe. When you need to adjust your lights, and you always need to make adjustments to your lights, I would much rather have a vertical mount while shooting on a tripod. With the horizontal design, I (and I suspect most people, as I'm 5'10") aren't tall enough to look down onto the screen to make adjustments. This means you either need a step stool or you must move your camera off subject, tilt your camera so that you can see, then make adjustments. Of course, if you're off-tripod and just shooting freestyle, this is not an issue at all. Other than that, it's pretty easy to make any/all adjustments. You can control your flashes using TTL, Manual mode, and highspeed sync. I can't imagine anything that a Canon transmitter or Pocket Wizard could offer that this doesn't do at a MUCH cheaper price. As a matter of fact, after much research and comparing options, I was very close to purchasing the Pocket Wizard option when I came across this product. I am so glad that I chose this. Other than the fact that Pocket Wizard does offer a vertical design and maybe easier adjustments as a result, I can buy this transmitter and a bunch of triggers for the less than the price of a Pocket Wizard transmitter. Yongnuo option is a much better route because, with the same amount of money, you get so many more options in gear. In my view, this is a Pocket Wizard killer. I have only good feedback and would recommend this product.
By Anthony M.
November 9, 2017
The YN-622C system is an absolutely fantastic tool. Performs exactly as expected and works right out of the box. It only took moments to setup. I've docked one star due to the fact that the display does NOT reflect the in-camera flash compensation settings which made me think for quite some time that I had it setup wrong. When I finally did a test shot I realized it was indeed sending the in-camera compensation it just wasn't reflecting that setting on the display. The compensation settings on the LCD are in addition to any settings in camera. So if you have +1 ev set in camera and you see 0 ev on the device it really is +1 ev. And you could make it +2 ev by adjusting the transmitter. This is a bit confusing at first, but perfectly manageable. The screen has the real estate, it'd be great if it could display the current camera setting at any time, as well as any supplemental compensation. This does not in any way deter me from highly recommending this device!
By Joe The Flow
October 23, 2017
The are fantastic triggers and you can't beat the price. Purchased these as test to see if they were worth the money. They exceeded my expectations. Solid build, mult-channel. I'm going to purchase more of them. Here's the specs: Flash mode: E-TTL(II), Manual flash, Multi flash • Shutter Sync mode: 1st curtain, 2nd curtain, high speed sync (HSS/FP), Max 1/8000s sync speed • Control remote flash using camera's flash control menu screen(Remote Control Mode) • Support E-TTL / Manual/ Multi flash mode (Mix Control Mode) • Support FEC, FEB, FEL, Modeling flash • Support E-TTL group ratio (ALL/ A:B/ A:B:C), Manual/Multi group (ALL/ A:B/ A:B:C) • Support auto zooming, manual zooming, AF lamp • Support LCD Live view triggering • Support high-speed continuous shooting trigger • Settings saved automatically • Compatible with ALL YongNuo/ Canon EXII series flashes • Support PC port triggering strobe flashes (PC Sync cable is not included, but you can buy it from YongNuo store) • Support single-contact of camera & flash triggering (the max sync speed is 1/250s)
By Sincerely Noob
October 16, 2017
I started with off-camera flash by buying YN 622c and ỴN68EX II. It was simple to use and serve me well for almost a year. But since the newer version has the same cost, I urge you to buy the YN 622C II pair instead. Now that I have used my flash with umbrella in a few house parties, I am getting tired of changing the flash ETTL EV output manually. So I bought the YN622C-TX to control my YN-622C. Save me a lot of time not having to step down from the ladder to change the flash output before I can take more photos. Overall the unit works great. Very affordable. I put Eneloop in these and haven't had to change them in 6 month of once-per-few weeks usage.
By Kevin A. Diossi
September 8, 2017
Words can't describe how terrific this product is. I've sold my stupid pocket wizards in favor of these for use with my speedlites. Build quiality is excellent, it takes AA batteries, and they have a dedicated on/off switch instead of a button - an auto off feature would be nice if you left them on.The fact that I can go into the flash menu on my camera or on the top of my camera and command power to flash groups is spectacular. Canon only supports 3 groups, so I can't complain too much, but I would have preferred to see 4 or more groups for improved flexibility. Oh, and the AF assist beam is superb. High speed sync adds a new dynamic possibility to lighting as well.
July 16, 2017
Great product for a great price. Bought this in combination with 3 YN-622 remotes and 3 YN-568EXIIs (minimum level flash if you want to control the flash remotely) This controls our YN560s we used with the Cowboy Studios setup, but you have to manually change the settings on the flash. We use the cheaper CS (Cowboy Studios) triggers and the more expensive Pocket (Pocket Wizards) and PCB (Paul C Buff) Cyber Commander Trigger/Receivers (for main lighting). Comparing to the others, I like them a little better than our PWs and feel they offer almost everything at a much better value. Still shop everything and read reviews of all the products before you buy because technology changes and updates fast. We use lot of different lighting, so these are for our quick/mobile shoots. I replaced our Cowboy Studios and Pocket Wizards devices as they are finicky at times matched with our speedlight whereas the Yongnuo devices have been reliable with little issues and yet to cost me an important shot or die in the middle of a shoot. Using AA batteries does make them slightly bulky, but I feel worth it when using them in combo with the Rechargeable AA Panasonic EnLoop v4s (batteries we also use with speedlights) and they have lasted for all day events without wearing down. The CS and PWs use the specialty watch style batteries, which seem to wear down faster on us and more expensive in the long run to replace. Best bang for the buck for those needing remotes/triggers for speedlight. Fits in my extra Lowepro backpack pockets that don't get used for anything else. Device is simple and easy to control after a quick glance over the manual. Currently using them on a 6D and 5D3 without issues or conflict. Only downside was I had to update to the latest firmware.
By Richard Macias
June 13, 2017
I own plus 3 and I bought this unit as a back up. Amazingly after several uses this has now become my primary. I can not agree with previous Zebratt that the manual was difficult to understand. The button configuration is so simple you don't even need the manual but incase you do both my wife and I found it very easy to understand. The range on the unit is excellent as is the ease of use in regards to changing groups, high speed sync, second curtain and power. Con: The only major issue I have with the units are the way they connect to the hot shoe.Its an all plastic thin screw down fastener. These make it very difficult to secure and removing them with bulky fingers can be equally difficult. It would be nice if they used locking fasteners rather than these. Other than that I love it! The pocket wizard uses something similar as well but its a bit thicker making it easier to lock and remove. But I wish they also used locking fasteners like those found on the canon flashes.
June 8, 2017
This thing is amazing. No more going into the camera menu, so it's very fast at changing settings. For example, three manual flash's all at different settings in three groups. Or, you can have more than that of course in different groups, or you can mismatch some with ETTL and some with Manual. I don't ever shoot ETTL, so if you just shoot manual, you'll more than likely be able to use this with Sony, Canon, or Nikon, even if it's not Nikon branded. You just won't get ETTL, probably won't get HSS either, which I don't use anyway. For the price of this thing there is no reason not to have one. Yes, the flash's have to be on triggers, but the triggers are sold very cheap. As far as yongnuo, I've never had problems or anything tear up, except one flash and that lasted a long time. Buying another one was still better than having a Canon for that much money. Plus the flash that tore up was a very very old model. If you have something without an AF assist lamp, even when you don't have your flash with you, if you're gonna be out at night, depending on how dark your auto focus goes, you can use this as an AF assist lamp. I use it on a Canon 6D, so that already focuses in situations that are darker than anything I'm gonna encounter, also darker than any other AF point on any Canon camera. This will bring it to the point of being able to focus in extreme low light. As far as the part about triggering flash's, it's flawless. Rather you have Yongnuo flash's or not. If I had all Canon flash's I would use this as well as the triggers for them. The radio frequency is much better than putting a flash in optical slave mode, because it can be hidden deep in a soft box. It can go outdoors and be nowhere near it and trigger all of them, etc.
May 9, 2017
I was an early adopter of the Yongnuo 622 flashes. Price and performance packed, they got the job done, albeit with a bit of fiddling about. The biggest downside was the inability to easily control the flashes output, in TTL or manual. In frustration, I turned to the PocketWizards, investing in the TT5/Flex setup. I had my control, but it wasn't exactly the neatest arrangement. And PWs have issues with Canon flashes, so they wear socks. Enter the TX. I'd been waiting for these to be released and for some first impression reviews to roll in. PW Killers. On price, of features, on performance. They're everything I needed and wanted for flash control, whether it was my array of Canon Speedlights or one of my studio stobes. TTL or hypersyncing, its all there. Easy, intuitive controls right on the transmitter. Bonus point for allowing camera remote trigger.
By Adam Donohue
April 21, 2017
Love this commander! Full control of all my speed lights with a quick push of a button with out missing, WOW! It frees me up to place several speed lights around the venue I'm working in and have full control of all of them. And the ability to turn on and off the AF assist beam is very helpful, especially when working with videographers. I recently used it at an event that had a stage with spot lights on it but no lights on the crowd. I placed a speed light on each side of the stage and was easily able to balance there power with the stage lighting. I put one on group A one on group B to give me even more control as I moved around the room. I could quickly turn either of them on or off to show the crowd laughing. If Yongnuo could find a way to put a hot shoe on this is would be the perfect unit. I have 4 Yongnuo YN-565EX II speed lights and 7 YN-622C transceivers plus the commander.
By Wing Tang
April 19, 2017
This made my work flow a lot simpler when working with my speedlites. I have this on my 5D MKII, a 622C on a canon 430EXII a 622C (2) on a 580EXII (2) on a variety of light modifiers. This transmitter works flawlessly every time in controlling the output of power on each of my flash units on each channel. Switching the power out puts during the shoot has never been easier by just hitting an arrow to adjust. You could definitely do without this and use 3 622C and manually change settings and do whatever you need to do. But for my purposes, its perfect to manually change settings wirelessly. I use eneloop batteries in all my flashes, transmitter and receivers. Have not had any misfires/fail yet since owning these units.
By M. Heltsley
April 15, 2017
This makes a huge difference! I love my flash triggers, and use them all the time. I use them for speedlights, and for studio strobes, and to combine them when needed. I have Alien Bees and Einsteins as well as a collection of various manual and canon branded speedlights. The flash triggers work on all of them and this controller easily allows me to control them in groups, with or without TTL mixed in, and quickly and easily switch between different groups and configurations. I use these for events where I have different setups for different parts of the room, then quickly and easily move between those groups with this commander and I'm always in control. Some groups have TTL for its dynamic lighting ability and some use manual controls, and I can even use them all together. It's better than any other system I have (and I have several, Cybersync, radio popper jrx, pocket wizard). I recommend this to everyone.
By Tom Marvel
April 9, 2017
I normally don't write reviews or give feedback but I'm making an exception for this product Yougnuo has been amazing since it introduced the YN-622 transceiver The TX is beyond Even as a Canon shooter with flash control in my personal on screen camera menu, the TX makes it so much easier & effortless to control three light sources right from the shooting position Especially with a light in a soft box 9 feet in the air The TX worked perfectly right from the box Don't really to need to read the manual (The apparent google translate chinese to english is a game in of itself) I highly recommend downloading the The Other Youngnuo User Guide (I now have on-camera flash control on my Fuji, too) For all you fence sitters: Just buy this controller & don't look back If I was Pocket Wizard I would renew my prescription for Ambien so I could get some sleep at night
By M. Wesala
April 7, 2017
My hope was this controller would allow me to use my Canon speedlights (along with the yn662C receivers) to control the flash units in manual mode and trigger them, on a NON CANON BODY. I was afraid the unit would have to interface with the camera to use ANY of the power adjustment features, but this is not the case. It is stand alone, and will adjust flash powers (again, in Manual Mode) and let me trigger them with the hot shoe of my Olympus EM1. I don't need TTL or ratios or anything, just reliable control of the flashes in manual mode and this lets me accomplish that. This is a pretty big deal for me, and I wanted to make sure I passed this info along to others who may be transitioning, or using mirrorless cameras that do not have a robust flash system of their own (i.e. Fuji, Olympus, Sony). Yes, they all have some sort of system, but in real world use, stupid simple and reliable is the name of the game, and this gives you that. I am currently using this with an EM1, a 580 EXII and a YN568EX.
March 15, 2017
I am a hobbyist photographer. I was to the point where i felt the need for an ability to trigger flashes wirelessly. The choice came down to Paul C Buff Einstein set or Yongnuo. Took the chance with Yongnuo and got entire system. The 2 TTL Flashes, 1 Wireless Trigger and 4 Transreceivers for Canon. Spent 475ish for this purchase which resulted in savings of about 900 vs Einstein. Really worthwhile and takes my learning to the next level. Entire system is easy to use. I didnt even read the manuals. Was able to get going right away. Flashes are very comparable to my 580 EXII and do the job fine. Here is the kicker. For the price of just one Canon flash, entire system came. YN 622 Transmitter and Transreceivers are simple and easy to use. The first order of Transreceivers seemed like used or returned product. So returned it and got replacement. It was easy fix. If you consider yourself upto an intermediate photographer, and are on a budget, just get this system. You will be happy.
By Tom & Sue O.
March 9, 2017
We have used the Yongnuo YN-622c transceivers on our Canon and our Yongnuo speedlites for over a year and been impressed with the quality of construction, flawless performance and price, of course. I have been seeking the LCD flash controller since Yongnuo released the Nikon version last year. Finally found it and ordered from HKong and prepared to wait till the end of September for anticipated delivery. Received NINE days after ordering from HKong!!! I am as pleased with the shipping time as I am with the controller itself. If you have the YN622c controllers this will complement and round out your equipment. No longer will you have to twiddle around in the camera menu to set up your external flash. Wonderful product. Happy user.
February 16, 2017
I Ordered this YONGNUO YN-622C-TX E-TTL Wireless Flash Controller YONGNUO YN-622C-TX E-TTL Wireless Flash Controller for Canon , because I have been using the YN-622c's to control my 2 Canon 580EXII's and my YOUNGNUO YN568EXII for over a year and really love them. I sold my pocket wizards and ordered 4 of the 622cs. One to use as a master controller on the camera and the other 3 for the flashes. I have shot many portrait sessions, weddings, events using green screensand I love them. My goal is to purchase 3 more YOUNGNUO Flash units and 2 more transceivers to set more flash units around the reception halls for my weddings so I can light the room with my wife and I each using the YN-622C TX's on our cameras. Smooth Y'all! All you Strobist's out there JUMP ON! Pros: Quality is great Size, about the same as the 622c about 1/2 the size of a deck of cards. Works perfectly! Price, Unbelievable at $40 US Cons: Please get someone to properly write the manuals in English.
By Justin Labinski
January 19, 2017
Amazing! I have been using a cheap set of flash triggers for a while until they just broke. I wanted to upgrade to something with more control but didn't want to invest nearly a thousand dollars in the professional level triggers like pocket wizard. I already had a few Yongnuo flashes that were working great so I decided to try out their triggers and I'm so glad I did! The triggers work perfect! They have 3 channels to mix flash power level, built in E-TTL metering with focus assist you can even leave a trigger on without a flash in darker conditions just to help your cameras auto focus out. The only weird thing I noticed that might just be a setting change I haven't figured out yet is my Yongnuo flashes can't be controlled through the master controller. I use a mix of Canon and Yongnuo speed lights and only the Canons change when I adjust power levels. Great product will definitely be buy more as I add flashes. I use and Canon 5D Mark III and mix of speed light brands with no problems
January 10, 2017
I've used this now four times and this set works flawlessly. I used this with two flashes, a Canon 580ex and 580exii. With the 580exii I can control the power output on the flash remotely from the transmitter on my camera. However, I cannot control the power output remotely with the 580ex - I can only fire the 580ex. So I purchased another 580exii in order to use these transmitter to their fullest potential. And they're great. I see that Adorama sells two 600rt speedlites with the Canon transmitter for $1200. If you have two 580exii speelights already, this Yongnuo radio transmitter system costs under $120. That's 10% of the "new" flash set up. Unless you REALLY NEED to have the latest flashes, I'd say save yourself over $1000 and take a mini vacation or buy another lens or buy an awesome guitar (I did!).